DLovin93

hey guys, I've just bought a 93 DL 4WD D/R and I'm looking to lift it. now i know there is probably 1000 topics on this but they are all over the place and you only get half the story in each one! what I want to do is 3" suspension lift with a 2 or 3" body lift. I have done the homework on strut spacing and any more than 2", bigger wheels blah blah blah. But i would like is a list of all parts and potentially drawings if you have any. To start i would like to know if I can use 3x2x1/2 (I'm not used to using imperial measurements so if i make a mistake or 2 just bare with me) RHS or if ill need to make a more sturdy unit, dropping the cross members what is a the best rule of thumb for working out how much to drop. As for body lift should the blocks be solid is the 1/2 RHS good for that. Nuts and bolts, what are the best grade for all this, general purpose, high tensile, building. These are all things i just cannot find answers to on any post. If you can think of anything else i have forgotten please feel free to add it, I am looking to do this right and not too dodgy or bodged together. if that made no sense just let me know and I'll try to get it right for you that time. cheers guys!