[EA to EJ Radiatior Swap]

Hi This is Jerry, i have an EA81 85 hatch back with the 1.8 imperza engine. The radiatior is an early legacy and i use stock ej hoses. I made the bottom supports out of 1 1/2 x 1/4 inch flat about 6 inches long drilled a hole at one end to fit the lower rubber mount. I cut a slot in the lower support and welded the plates to the support. The top support i use the stock ej brackets cut them and welded them to fit the top of the support. The fan is mounted in front so it all fits. Thanks Jerry

[EJ18 into turbo brat]

Hi This is Jerry, thats a good point on the obd2 but the EJ 1.8 wiring harrness is alot simpler and alot less wiring. I have bolth set ups and the 1.8 is alot cleaner not as much wire to deal with. Also i use the 1.8 exhaust Y pipe and cat it fit in my 85 hatch. Want to know more call me 1-509-952-2855 Thanks Jerry

[5 speed d/r into brat]

Hi This is Jerry, on the 5 speed swap over the drive line is 48 inches of tubing on the hatch back and all other EA81 it is 51 inches of tubing. Thats just the tubing not counting the ends because alot of people measure then differently. Thanks Jerry

[Wiper control box]

Hi This is Jerry, that thing is under the dash on the left hand side of the steering column it is about 1 inch by 3 inch and round silver in color. Thanks Jerry

[5 speed d/r into brat]

Hi Clay This is Jerry, i make a 5 speed kit for your brat call me and i can let you know what all you need 1-509-952-2855. Thanks Jerry

[VeeDub TDI -> Brat body?]

Hi This is Jerry, i have an 85 hatch back the set up in it is the engine is a 93 1.8 impreza fuel injection the tranny is a 86 rx 5 speed dual range with 3.70 gears with rear dics. This is no joke i drive 500 miles every week for work and i have check the mileage the last 5 times i have fill it up 38.4 miles per gallon. My goal is 40 miles oer gallon but that will be next spring when it warms up. You can see my hatch click on this year show pictures and on page 5 you will see a light blue hatch thats it. Thanks Jerry

[1985 brat transmission swap]

Hi This is Jerry, call me and i can let you know what you need to install a 5 speed dual range tranny 1-509-952-2855. Thanks Jerry

[EA81 mated to EA82 d/r yet again...]

Hi Aaron This is Jerry, call me i can tell you what you need to use in your set up i have done this many times. 1-509-952-2855 please call me before you spend any money on parts that you won't use or won't fit. Thanks Jerry

[I've got a dilemma.]

Hi This is Jerry, yes put the 5 speed in your EA81 car with the 5 speed kit that i build it is a unbolt the 4 speed and bolt the 5 speed in to place. With this kit you keep everything stock inside of your car. Let me know if you need a kit. Thanks Jerry

[Plastic Surge Tank?]

Hi Tyler This is Jerry, if you look at the wcss 12 pictures on page 5 you will see my light blue hatch it shows the engine compartment. It is the silver can with the flux cap. decal on it mounted in the spare tire area. Thanks Jerry

[EA81 speed sensor]

Hi This is Jerry, well i did so reasurch on the EA81 speed sensor and how to conect it to an EJ swap. The EA81 only had that sensor that came with cruise control so some of the EA81 cars don't have that sensor. There are 2 wires on it 1 black that gose to ground and the other is yellow with a red stripe it gose to the EJ computer. If somebody is looking for this sensor i have an extra. Thanks Jerry

[Mildly built EJ22]

Hi Andy This is Jerry, now you know how much fun i have when i drive my hatchbrat with the holley 4 barrel carb. The looks you get when you get on it fun factor yah:lol: Thanks Jerry

[Mildly built EJ22]

Hi Andy This is Jerry, now you know how much fun i have in my hatchbrat with the holley 4 barrel carb. Fun factor yah and the looks you from people when you get on it, like what the **** has he got in that. Thanks Jerry

[Plastic Surge Tank?]

Hi Tyler This is Jerry, i got my tank off of ebay cost me about 90.00 ship from China. If you want to see how i have it mounted come and see me not that far away. Thanks Jerry

[Five speed swap in a ea81 ?]

Hi This is Jerry, i live in Selah Washington state so i am 3 hours difference 7 am or later is ok with me. Thanks Jerry

[Five speed swap in a ea81 ?]

Hi This is Jerry, yes i make a 5 speed kit for your car call me and i will let you know what to do 1-509-952-2855. Thanks Jerry

[84'GL Not looking for Power but For reliable Motor]

Hi Rich This is Jerry, i have a 85 hatch that is the same engine compartment as your wagon has and i have a 93 impreza 1.8 engine in it fits without any cutting. Want to know more let me know. Thanks Jerry

[Thoughts on EA81 Build]

Hi This is Jerry, far cheaper to EJ it. If you look at the wcss 12 pictures there is a light blue hatch that has a 93 impreza 1.8 engine and the wiring is alot less than the legacy. I check the mileage and i am getting 34.8 miles per galon i am a happy camper. If you want to know more let me know. Thanks Jerry

[WCSS12 Pictures!]

Hi This is Jerry, the last set of pictures did everybody notice the light blue hatch well it has the famouse flux capactior on it. I haven't drove it at 88 mph yet so i can't say if i will jump into the future. Thanks Jerry

[Wcss12]

Hi Flowmaster This is Jerry, i don't know the mileage yet but i can say it is in the 33-35 i will know by the end of the week. My hatch has a 93 impreza 1.8 engine and a 86 rx turbo 5 speed dual range tranny and alot more. Come to the show and see it Thanks Jerry

[Wcss12]

Hi This is Jerry, well is everybody ready for thhe show? I will be bring my new hatch some of you have already seen it but now i have it all together. This hatch drives like new i am very happy with it and no it's stock lots been change. This hatch i built for gas mileage because i drive 500 miles a week for work. So everybody come and see it. Thanks Jerry

[Odd noise after engine work (EA81)]

Hi This is Jerry, are you running a high oxtane gas now that you have up the compression? Try a bottle of 104 oxtane bost in the tank. Thanks Jerry

[Lifting a ea81]

Hey Everybody This is Jerry, those lift blocks for the front struts are at the bottom of the strut so there for you don't need to adjust for camber. I have a set on my hatchbrat and they have been on there for 6 years i haven't had any problems yet and now i am driving it to work putting on 500 miles a week. The tires are showing no crazy ware patteren, at the top of the strut yes you have to adjust but at the bottom no adjustment needed. Thanks Jerry

[Hubby wants to Keep it]

Hey Connie This is Jerry, give your hubby a big wet sloppy kiss for letting you keep your subie. Thanks Jerry

[Hey Jibs]

Hi Jibs This is Jerry, got the payment today the kit will be in the mail on monday just to let you know. Thanks Jerry