desdinova Posted October 1, 2009 Share Posted October 1, 2009 putting the finishing touches on an assembly and it's been so long since i started that i forgot a few things . i can't recall where each of these brackets went and where the vacuum hoses from the green fitting on the front go to . thanks for your help . jim . [/img][/img] Quote Link to comment Share on other sites More sharing options...
GeneralDisorder Posted October 1, 2009 Share Posted October 1, 2009 Which pushrod engine is this and what year? I've never seen a thermo-vacuum valve in that location before.... GD Quote Link to comment Share on other sites More sharing options...
desdinova Posted October 1, 2009 Author Share Posted October 1, 2009 1981 ea81 hatchback Quote Link to comment Share on other sites More sharing options...
markjw Posted October 1, 2009 Share Posted October 1, 2009 I can't contribute much except to say that I have seen that valve in that location before. It was on a parts car I had for just a short while. I have always wondered about it. I just thought it was part of the block heater. Quote Link to comment Share on other sites More sharing options...
GeneralDisorder Posted October 1, 2009 Share Posted October 1, 2009 '81 explains it - they didn't offer power steering till '82 and that valve and it's associated vacuum lines would interfere with the EA81 power steering belt. That valve was probably moved to the manifold. GD Quote Link to comment Share on other sites More sharing options...
nolicense Posted October 1, 2009 Share Posted October 1, 2009 i got an 81 ea81 hatch but not that sensor Quote Link to comment Share on other sites More sharing options...
desdinova Posted October 2, 2009 Author Share Posted October 2, 2009 no guesses on where they go to ? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.