Jump to content
Ultimate Subaru Message Board

91 legacy no back-up (reverse) lights


Recommended Posts

Have 1991 2.2L legacy wagon. Fuse and bulbs good; brake/turn/running lights good. No back-up lights when in reverse. Manual tranny...what type of mechanism for lack of better terminology "engages" the back-up lights to turn on. I would assume that there is some type of mechanical switch that is engaged when the transmission is in reverse or some switch under the center console panel by the stick shift?

 

Ryan

Link to comment
Share on other sites

When you find the switch on the tranny, unplug it and use a paper clip bent the right way to short the two pins in the plug. If the back-up lights work now (ignition on and engine running), the tranny switch is bad. If the lights still don't work, both bulbs are bad or a broken wire in the harness (if you have a wagon).

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...