January 18, 201016 yr I did it up near the actual valve but now that i have the motor out of the car i cut the pipe off and pulled the pipe thread from the actual spacer. I stuck a quarter in there and impacted the pipe thread nut back on. Will that quarter hold up to exhaust heat?
January 18, 201016 yr Yeah - heat isn't an issue - the quarter should be fine. I usually just remove the threaded portion from the pipe, drop a fender washer in there and weld it in place. GD
January 18, 201016 yr remember.. I cut mine off ..folded and beat the opening over..then welded it shut...
January 18, 201016 yr Author remember.. I cut mine off ..folded and beat the opening over..then welded it shut... Yea i was going to do that until i found out how damn thick those pipes were. I took the lazy way out and just threw a quarter in there lol.
January 20, 201016 yr you can also use the knockouts from a electrical box i believe, even cheaper yet. I have a quarter in mine cause i know it can take the heat.
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now