dcolli46 Posted August 8, 2010 Share Posted August 8, 2010 So I was working my way around the a/c system to see where I need to change o-rings etc so I can get it working again when I came across this: This is the hose that goes to/from the compressor itself. I want to know if I should super glue that sucka back on or if I need to start looking for a new core. Any advice would rock. Thanks, David Quote Link to comment Share on other sites More sharing options...
Scoobywagon Posted August 8, 2010 Share Posted August 8, 2010 That's going to need a new core, unless you want to try to weld it. That's an iffy prospect. It'll be easier to simply replace the thing. Quote Link to comment Share on other sites More sharing options...
dcolli46 Posted August 8, 2010 Author Share Posted August 8, 2010 Damn.. Good to know. Thanks. Off to the junk yard!! Quote Link to comment Share on other sites More sharing options...
Scoobywagon Posted August 9, 2010 Share Posted August 9, 2010 You might wish to call a parts store. A new evap core isn't usually terribly expensive and is a known good part with a warranty. Quote Link to comment Share on other sites More sharing options...
DaveT Posted August 9, 2010 Share Posted August 9, 2010 That looks like a condenser core (the one in front of the radiator). The evaporator is up under the dashboard. Quote Link to comment Share on other sites More sharing options...
dcolli46 Posted August 9, 2010 Author Share Posted August 9, 2010 Yeah you're right it's the condenser core.. thanks for the correction. Good thing too, sounds like its a hell of a lot easier to change than the evap core. Quote Link to comment Share on other sites More sharing options...
Mugs Posted August 10, 2010 Share Posted August 10, 2010 I have a full system for sale if you want it. Or just the parts you need. Pm me. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.