Skip to content
View in the app

A better way to browse. Learn more.

Ultimate Subaru Message Board

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

How do I do this??

Featured Replies

I want my brat to be low like this one and also what is up with these rims? exspecially the ones in the back? What kind are they?

 

0c684934.jpg

Looks like a stock brat w/ redrilled 14' or 15" chevy sixlugs w/ low profile rubber.

  • Author
Looks like a stock brat w/ redrilled 14' or 15" chevy sixlugs w/ low profile rubber.

 

 

How is it level? mines not level at all.

 

SJ

It's not. The angle is deceptive from picture.

 

It's called "forced perspective"

 

There is however an adjustment on the rear torsion bar and the front spring seats.

  • Author
It's not. The angle is deceptive from picture.

 

It's called "forced perspective"

 

There is however an adjustment on the rear torsion bar and the front spring seats.

 

I knew about the rear adjustment but I didnt know about the front, thanks ill try the front and see if it levels out.

 

SJ

If you raise the front using the strut spring perch adjusters (if it still has them - many have been replaced with non-stock struts) it should only be done for off-road as it will create a positive camber situation and will rapidly wear out your front tires on the road (outer edge wear - especially on turns).

 

The rear adjust is safe to use anytime but the front should be left fully down unless you are not on the pavement. EA81's already have a tendancy to wear the outer edge of the tires in turns - jacking up the struts will just make it that much worse.

 

If you want to level it a 1" lift on the front only would come pretty close to doing that but with such a small lift camber correction is not easily done.

 

GD

Edited by GeneralDisorder

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.