Skip to content
View in the app

A better way to browse. Learn more.

Ultimate Subaru Message Board

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

temp gauge not working correctly

Featured Replies

96 legacy 2.2

Awhile back the gauge started reading only 1/4 the way up instead of the normal 1/2 way up

 

It's not an air bubble issue...heat seems normal

I took an infared temp gun and took readings on this car and also on my 96 2.5 outback

 

2.2 upper hose close to engine--163 degrees

2.5 upper hose close to engine--173

 

2.2 upper hose close to radiator--155 degrees

2.5 upper hose close to radiator--157

 

2.2 lower hose close to engine--145 degrees

2.5 lower hose close to engine--135

 

2.2 lower hose close to radiator--155 degrees

2.5 lower hose close to radiator--121

 

So I think it is just a faulty gauge sender

Thoughts?

WHere is it? I think someone said under the intake on pass side?

Anyone have a photo or illustration of it?

Can I scab one off a 97 2.5 OB intake?

Do you use teflon tape on the threads?

thanks

The problem may just be due to a dirty connection at the sensor. I think it is located near the upper radiator hose connection on the engine.

The problem may just be due to a dirty connection at the sensor. I think it is located near the upper radiator hose connection on the engine.

 

it's on the crossover pipe, passenger side under the intake, i think it is #4, maybe #1. the one for the guage is the one with only one wire. the 2 wire unit is for the ECU.

 

366494903601.png

  • Author
it's on the crossover pipe, passenger side under the intake, i think it is #4, maybe #1. the one for the guage is the one with only one wire. the 2 wire unit is for the ECU.

 

366494903601.png

 

hanks John

Anyone know if a97 2.5 sender works for a 96 2.2 engine?

wha seals the water from leaking? does it have its own gasket?

The waterpump has its gasket and it is torqued down evenly among the 6 or whatever bolts. When mine was leaking I had to get everything off to see where excactly it was from and by that time I saw other things which needed replaced. I just replaced it with a better one but the problem was really that one bolt was loose. One is sorta hidden. If it leaks from the shaft or a little hole under the shaft then it's just shot anyway.

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.