Skip to content
View in the app

A better way to browse. Learn more.

Ultimate Subaru Message Board

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

can you tell me what yr. is my EA81?

Featured Replies

I bought a 85 three dr. 4x4, When I looked in the shop manual, it was obvious there has been a motor swap. no timing belt covers. have never heard it run, bad head gasket, center head nut was laying in the rocker cover, I replaced the gasket, but it acted like the timing was off. It poped and crapped through the carb.

I don't know what the timing should be set at.

The head torque was set was 22/ 43/ 47.

Valve lash set at 10 intake, 14 for exhaust

If someone can tell from the stamped case numbers 565774 please let me know.

Any web sites with this info?

 

 

You can email me @ floortom65@msn.com

 

Thanks

no timing belt covers

 

So does that mean it has uncovered timing belts, or no belts to cover?

 

It may sound like a silly question because you say you are asking about an EA81, but in 85, many soobs went over to the EA82.. Just trying to attain some clarity:D

 

PS.. your name is floortom.. are you perchance a drummer?

  • Author

thanks for reply so soon.

there are no belts to cover.

the block is stamped EA81

And Im in the same room with a 10 pc. pearl lets rock!

Ok, your car was made till (I believe) 88. Whatever you do, dont tell the parts store the year of your car. All they do is give you the wrong parts and argue with you. Its best to go with 84 as the year, cause its basically the same thing and the parts are correct. The specs are also the same.

 

Timing is 8 deg BTDC

Head torque is:

1st step 22ft lbs

2nd step 43ft lbs

3rd step 47ft lbs

Check to see if there is a label on the side of the valve covers saying not to adjust the valves. This would mean you have hydraulic lifters.

Originally posted by Turbone

Ok, your car was made till (I believe) 88. Whatever you do, dont tell the parts store the year of your car. All they do is give you the wrong parts and argue with you. Its best to go with 84 as the year, cause its basically the same thing and the parts are correct. The specs are also the same.

 

 

Or, you can tell them you have a BRAT, up to 87. Almost all the parts for that are the same as well, and the parts store idiots have a seperate listing for it.

80-84 are ea81 listings

85-94 are ea82/loyale listings

85-89 are hatchback and brat(-87) listings, after they quit making wagons and coupes after 80-84

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.