Jump to content
Ultimate Subaru Message Board

clutch questions


Recommended Posts

When I went to napa to get a new clutch for my 86 Brat(EA81) they gave me a clutch kit for an 86 GL wagon(EA82) which is 24 spline.The pressure plate seemed to fit on the flywheel fine, same with the pilot bearing, but the friction disk was 3 splines to big for the transmission shaft. The 24 spline 8 7/8 should fit fine. I dont know about the 7 7/8 disk for FWD, mines 4wd 8 7/8

Link to comment
Share on other sites

When I went to napa to get a new clutch for my 86 Brat(EA81) they gave me a clutch kit for an 86 GL wagon(EA82) which is 24 spline.The pressure plate seemed to fit on the flywheel fine, same with the pilot bearing, but the friction disk was 3 splines to big for the transmission shaft. The 24 spline 8 7/8 should fit fine. I dont know about the 7 7/8 disk for FWD, mines 4wd 8 7/8

 

i read ofter hours of searching and it ways the 21 spline is for the hatchback and brat

 

some sites seem to mix the diameter and splines up which made it hard on me

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...