is it possible to take a body kit from any impreza and put it on an 86 gl?

is it possible to take a body kit from any impreza and put it on an 86 gl?

Impreza body kit???

with enough time and $$$ anything can be accomplished. first step, buy a tape measure. step two, pencil/ paper. compare sizes and use your head. measure twice, cut once. good luck.

 

as for a straight bolt on solution: my guess is no, otherwise itd be a gl not a wrx

 

 

 

RV

I have seen pictures where someone used the front and rear bumpers, and even the dashboard and steering column from a 93/94 legact into a loyale wagon. It almost looked stock, but you could tell where the bumper was just a little too wide. It looked good though, twin turbo ej22 and all

I also have seen around town a 2nfd gen legacy with an impreza rs bumper on the front

 

You would be surprized how much any subaru is dimentionallt similar, that anything should fit enough to locate it into place.

Thanks i appreciate all the help!

i photoshopped an impreza rs front bumper onto a brat once, but that was the farthest i got.

 

it is actually very close though.

 

if you do it, be sure to take lots of pics and let us see how it turns out.