This is same block I wrote about before ( the wavy deck)..just back from the machine before I throw it out...the cylinders are wider at the bottom (3.6234) then at the top (3.6218) the top still being within spec ..any body know as to why the cylinder out of round is reversed?? ..first time for the shop to see this happen...

Just hone it round again and have the pistons coated by SwainTech. They can add .004" to the skirts and save your block.

 

GD

Just hone it round again and have the pistons coated by SwainTech. They can add .004" to the skirts and save your block.

 

GD

.. Thankyou