I bought a LF spindle from Pick N Pull today for fifteen bucks. It was from a 89 Subaru FWD car. What I need to know is.... will it fit on my 91 4WD Loyale wagon? Also, when are those greedy new owners going to have a fifty percent off day?

If you just replace the bearings you won't need a 50% sale. They are only about $10 each for the bearings from a bearing house - 6207-2RS-C3.

 

GD

Yeah, pointless to go to all that trouble just to install bearings that are probably in worse shape.

 

You'll need two. eBay is your friend.

 

http://www.ebay.com/itm/RBI-6207-2RS-C3-Premium-Bearings-Lot-Set-2-NEW-/280669143095?pt=LH_DefaultDomain_0&hash=item41592f4037#ht_500wt_1180

Yes, the part will fit the same. go ahead and swap out, and then bench build your original for install later.

 

swapping the knuckle is easier if you just need a quick fix for now versus time/mess/tools.

 

make it easier and pull the knuckle and swap as the knuckle/axle assembly. make it less work by swapping the whole thing with the strut.

 

this works if just the knuckle or the whole assembly is the same cost either way.

 

But to just answer your question, yes, the parts are the same.

Cool....