darsdoug Posted November 14, 2011 Share Posted November 14, 2011 I bought a LF spindle from Pick N Pull today for fifteen bucks. It was from a 89 Subaru FWD car. What I need to know is.... will it fit on my 91 4WD Loyale wagon? Also, when are those greedy new owners going to have a fifty percent off day? Link to comment Share on other sites More sharing options...
GeneralDisorder Posted November 14, 2011 Share Posted November 14, 2011 If you just replace the bearings you won't need a 50% sale. They are only about $10 each for the bearings from a bearing house - 6207-2RS-C3. GD Link to comment Share on other sites More sharing options...
Cyfun Posted November 14, 2011 Share Posted November 14, 2011 Yeah, pointless to go to all that trouble just to install bearings that are probably in worse shape. You'll need two. eBay is your friend. http://www.ebay.com/itm/RBI-6207-2RS-C3-Premium-Bearings-Lot-Set-2-NEW-/280669143095?pt=LH_DefaultDomain_0&hash=item41592f4037#ht_500wt_1180 Link to comment Share on other sites More sharing options...
MilesFox Posted November 14, 2011 Share Posted November 14, 2011 Yes, the part will fit the same. go ahead and swap out, and then bench build your original for install later. swapping the knuckle is easier if you just need a quick fix for now versus time/mess/tools. make it easier and pull the knuckle and swap as the knuckle/axle assembly. make it less work by swapping the whole thing with the strut. this works if just the knuckle or the whole assembly is the same cost either way. But to just answer your question, yes, the parts are the same. Link to comment Share on other sites More sharing options...
darsdoug Posted November 14, 2011 Author Share Posted November 14, 2011 Cool.... Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now