Jump to content
Ultimate Subaru Message Board

Replaced battery, worked for a few days, then nothing.


 Share

Recommended Posts

I've got a 88 DL sedan, its battery (which was 2-3 years old) seemed to have died, so I had the battery recharged. It worked for a couple days, then the car had no response at all thereafter. No lights would work, wouldn't attempt to turn over (or even "click" when I tried to start the car), nada. So I replaced the battery, and it worked for a few days. However, now it's not doing anything at all again. What gives?

Link to comment
Share on other sites

You should be able test the alternator by measuring across the battery terminals with a multimeter (fairly cheap at radioshack or you can get a better one from an electronics supplier.) When the engine is running the terminals should read 13-14v. Or you usually get a place like sears parts or another place that sells batteries to test it for you for free. I had to replace the alternator in my forester a few years ago when the battery kept dying. If it is the alternator do some research on here, there may be a swap from another car that will be an upgrade to support future accessories if you want to add more lights or whatever.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...