I am looking for the torque specs and the procedure for torquing the heads and intake. Tried searching but did not find anything for my specific engine. Thanks!

Here.Title says 05 but is the same.

http://www.bustedfingermotorsports.com/forums/viewtopic.php?f=18&t=210

Inside it says 04 but that is Euro date.

 

O.

Looking at the bolts they are numbered as follows:

 

3 1 5

6 2 4

 

The torque sequence is as follows

1. torque all bolts in sequence to 21 ft-lbs

2. torque all bolts in sequence to 51 ft-lbs

3. in reverse order loosen all bolts 180 degrees

4. do step three again

5. Torque bolts 1 and 2 to 25 ft-lbs

6. torque bolts 3 -6 to 11 ft-lbs

7. torque all bolts in sequence 90 degrees

8. torque sll bolts in sequence 90 degrees

 

You are done.

 

Hope that helps.

 

Mike