trikerbob Posted March 14, 2012 Share Posted March 14, 2012 Hi guys, I purchased a reman Dist off Ebay. Wasn't exactly what I thought it would be, but I'm sure it will work for my use. I Belive it might have been a Brat dist about 87'. Inside it has 4 little posts to plug wires into. they are lettered D,B,T,C. I need to know the 2 that go to the coil. What one to - side and what to + side. Thanks for your help. Bob Quote Link to comment Share on other sites More sharing options...
GeneralDisorder Posted March 15, 2012 Share Posted March 15, 2012 That's a turbo distributor. Can probably make it work but I don't know which of those goes to the coil and which go to the knock detection box.... GD Quote Link to comment Share on other sites More sharing options...
trikerbob Posted March 15, 2012 Author Share Posted March 15, 2012 Yes, I thought it was for the turbo, but I can't see any reason why it won't work on a non turbo just as well. I just don't want to play roulet with the wires and risk burning something out. One wire has to go to positive and one to negitive side of coil to run, the other two will not be used. Was hoping someone might be able to open one up and see where the wires go. Bob Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.