Can I swap my SPFI EA82 Coil on to my Carbed EA81? Is the SPFI coil any different than the Carbed coil? I am guessing the SPFI coil may be higher output, is this going to be an issue?

 

Cheers,

-Tom

ive used accel coil, and a msd blaster. both worked great.

Opps i misread the post...this is what i use on my EA82...i was gonna delete this post but i don't know how haha.

 

I also used the Accel Coil with no problems!...looks cool too:brow:

 

Also use NGK wires and Plugs and the BWD/Intermotor stuff for cap and rotor

 

http://www.jegs.com/i/Accel/110/8140C/10002/-1

 

ive used accel coil, and a msd blaster. both worked great.

Edited October 10, 201213 yr by 92LoyaleH4
misread

Can I swap my SPFI EA82 Coil on to my Carbed EA81? Is the SPFI coil any different than the Carbed coil? I am guessing the SPFI coil may be higher output, is this going to be an issue?

 

Cheers,

-Tom

..generally speaking, FI coils are different from the carb coils ..it will work in the beginning, but over time most likely will prematurely burn out the ignitor within the disy..ignition parts are designed as a system and are meant to work together as such..

Alright, well that won't be any good. I just dropped a new Disty into the EA81.

 

I remember GD saying something about the MSD coils, as they are oil filled if I remember right, so you can not lay them on their side. I also remember him saying they will burn out the Regulator over time (Few years)

 

Thanks for the replies, I just repainted the original coil/bracket for the restoration.