i need help in wiring the third eye passing lamp, does any know what wires go where i have the factory manual and have looked on the manual here but im still a little confused because im not super good at wiring yet, i want to wire it to a toggle switch

These links might help.

 

 

http://www.indysworld.com/80s/general/USRM/3rdEye/using_center_light_w.htm

http://www.indysworld.com/80s/general/USRM/mick-usrm/electrical/centerlamp-relay.pdf

I got given this diagram a while ago I'm pretty sure it comes from USMB somewhere.

 

 

What grille are you going to use with the twin headlight set up?

 

TOONGA

cut a whole in the grill, im going to the 2 headlight setup but i need the head light buckets, and thanks those are going to help me because im more of a visual person

Edited October 12, 201213 yr by turbosubarubrat

still a little confused is it talking about hooking the relay to the the lamp/motor harness or the brats harness, i got the relay from radioshack today

still need help the relay i got from radio has 8 spades and im trying to hook it up the one link doensn't tell you where to put wires and the other diagram is for a 6 spade realy i found a really good descriptive way to do it but the window closed and my computer restarted:banghead:

I noticed that after sharing this post (dummy head) these files are no longer available so here they are again

 

TOONGA

centerlamp-relay.pdf

Passing Lamp Discussions and Wiring Notes.pdf

Scott - Wagon78 did a nice write up and with using Radio Shack bits . That was many many years ago. Not sure how stacked our archives are. But it was in there.