February 22, 201313 yr Say I got some lift blocks fabricated for a First Gen Lego. Where would I put them. I know sounds like a dumb question..... Edited February 22, 201313 yr by ThatSubaruKid
February 22, 201313 yr what size? are they strut lift blocks? if so, then on top of the struts ;-) edit: least, thats where i put mine.. though i have a Impreza.. same concept though.. i would think at least. -Justin Edited February 22, 201313 yr by crazyman03
February 22, 201313 yr Depends on how big of a block you want to go with. I think you can get away with an inch and a half to two inch blocks just on top of the struts, but any more than that and you will have to make subframe and crossmember blocks as well. Dropping the subframe requires extending the steering shaft and possibly the dogbone mount bracket on the transmission.
February 22, 201313 yr Like I mentioned in your other post, SJRs lifts come with 18 pieces total (I didn't use 2 because I think they are for manual trans cars, and mine is an auto). Engine blocks, trans blocks, rear sub-frame blocks, and strut blocks. Basically wherever there is a bracket under your car, you install a lift block, more or less. HTH!
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now