GeneralDisorder Posted April 19, 2004 Share Posted April 19, 2004 I'm guessing it would be the same as an 84, so could someone scan the diagram of the vacuum advance system from section 10 of the FSM. My FSM is for 1980, and has some weird distributors that have both advance, and retard in the vacuum can.... and it talks about timers and solenoids and junk that I don't know if I have or not. GD Link to comment Share on other sites More sharing options...
GLCraig Posted April 19, 2004 Share Posted April 19, 2004 The best I can do is diagrams from 83 http://home.comcast.net/~c.moe/Diagram01.JPG http://home.comcast.net/~c.moe/Diagram02.JPG If it's an emergency I could drive over with my 84 so you can have a first hand look. Link to comment Share on other sites More sharing options...
GeneralDisorder Posted April 19, 2004 Author Share Posted April 19, 2004 AAAHHH! Your links don't work! No - not an emergency. I just think that the disty isn't getting any signal through the normal vacuum lines. The can is working tho, as I can connect it directly to the carb and get it to work fine. But nothing is happening when it's connected to the hard lines. Looking won't help me - I know it's connected right - something is broken! So I need the diagrams to know what parts to test.... GD Link to comment Share on other sites More sharing options...
GLCraig Posted April 19, 2004 Share Posted April 19, 2004 Links are fixed Link to comment Share on other sites More sharing options...
GeneralDisorder Posted April 19, 2004 Author Share Posted April 19, 2004 Cool - thanks! I suspect that Thermo valve (I).... think I'll test it. GD Link to comment Share on other sites More sharing options...
GeneralDisorder Posted April 19, 2004 Author Share Posted April 19, 2004 So apparently my problem was the ERG valve. It's causeing a small vacuum leak, and since it's tee'd off the ported vacuum line to the disty, no vacuum is getting to either one! Going to replace that darn valve tommorow. GD Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now