So according to my reading peugeot wheels have the proper offset to run about 27x8.50's with 2" of lift and no fender chop. I can't find pugs but I do have a set of wheels off a toyota pickup and am considering doing the 6 lug swap, but would like to know what the offset is so I don't have to chop my fenders, and if I need to find different 6 lugs I can.

Thanks in advance,

Tom

At the bottom of this Write-up I made a list of wheels and their Backspacing. The Toyota 6-lugs use about 4.50 Backspacing which will keep the wheels tucked as much as the Peugeot wheels would.

 

http://www.ultimatesubaru.org/forum/topic/128105-offcial-6-lug-re-drill-thread/?do=findComment&comment=1087335

Thank you so very much