Georgedean1 Posted July 13, 2014 Share Posted July 13, 2014 Any tips other than take it to a dealer? Quote Link to comment Share on other sites More sharing options...
uniberp Posted July 13, 2014 Share Posted July 13, 2014 Yes, anything but the dealer. I'd try to find a local independent transmission shop and call them. Too many stories about dealers trying to be everything to every car and messing up on the particulars. Quote Link to comment Share on other sites More sharing options...
1 Lucky Texan Posted July 13, 2014 Share Posted July 13, 2014 (edited) george - if you have moderate skills with a wrench, consider taking the knuckle off and take it and your new parts to a local machine shop to swap the bearing. It's a hybrid move between full DIY and farming it out completely. probably save you a coupla hundred $$ Edited July 13, 2014 by 1 Lucky Texan Quote Link to comment Share on other sites More sharing options...
Georgedean1 Posted July 13, 2014 Author Share Posted July 13, 2014 I luck Texan, thanks for the advice, I think that may be the most prudent! Quote Link to comment Share on other sites More sharing options...
Georgedean1 Posted July 13, 2014 Author Share Posted July 13, 2014 Thanks for the advice 1lucky Texan. I think that that may be the most prudent advice. Quote Link to comment Share on other sites More sharing options...
forester2002s Posted July 14, 2014 Share Posted July 14, 2014 Try your local 'Canadian Tire' store. I had my 2002 rear wheel bearings done there. They were cheaper than the 3 Subaru dealers that I contacted, and they did it the very next day, whereas the dealers wanted about a week's notice. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.