January 25, 201511 yr while installing the correct air cleaner, i found this port which had a small aftermarket filter clamped to it.theres a port under the aircleaner i believe it goes to. is there anything else it hooks to?
January 26, 201511 yr Going to see if I still have the part manual page on that. Bit of a blizzard out now so I'm not checking my wagon just yet.
January 26, 201511 yr Must be on my last hard drive. Basically , the round silencer up top has a hose which goes directly to the air cleaner box. You have that red stubby connecting hose to that brass fitting. There's one large diameter stem on the driver;s side of the air box. That's the normal destination for that hose you're missing. Note the diameter of the silence outlet and air cleaner inlet are the same. And the two large hoses coming from the valve rocker covers meet at the front of the air box. Going by a 1977 factory service manual ,but should still be the same as I recall. Yours on the driver's side has been chopped. Edited January 26, 201511 yr by moosens
January 27, 201511 yr Author i have a big hose from both covers to the both of the air cleaner. the red hose should also go to the the bottom of the air cleaner.. that leaves a hose from the intake that has the brass fitting in it.my chilton skips the 79 .. .
January 27, 201511 yr That looks like part of the emissions equipment. That metal bendy silver tube helps recirc the exhaust from what I remember.
January 27, 201511 yr The red tube is where the PCV valve goes, the brass barbed fitting is usually replaced by a tee to the valce cover tubes. Earlier cars just vent those tubes into the air cleaner, later cars through a PCV valve.
January 28, 201511 yr Author installed the all new tubes/ hoses, replaced the red tube and flipped the tee over and hooked everything back up to air cleaner .. seems to run better.. still climbing in from passenger side... cant be that hard to find a outer door handle.
January 28, 201511 yr installed the all new tubes/ hoses, replaced the red tube and flipped the tee over and hooked everything back up to air cleaner .. seems to run better.. still climbing in from passenger side... cant be that hard to find a outer door handle. I saw one that looked brand new on ebay. I'll see if I can find it again. I'm pretty sure you can use 1 handle mechanism for either side with a little creativity.
January 28, 201511 yr http://www.ebay.com/itm/1980s-Subaru-Brat-GL-DL-Chrome-Door-Handle-vintage-OEM-Factory-NICE-/381137584696?pt=Motors_Car_Truck_Parts_Accessories&hash=item58bd920238&vxp=mtr you're welcome. buy it quick, if you have to im sure you can move the bar from one side to the other if its not the correct side (left to right)
January 28, 201511 yr Author the one on my passenger side is smooth, doesnt have the grooves,the ad says 80s didnt know if it would interchange.. if it will i'll buy it..
January 28, 201511 yr Author screw it !!! i bought it.. if it dont fit ,i'll have it to trade for someone else
January 28, 201511 yr they interchange fine...got one on the rear passenger wagon door and on the tailgate of the brat....came off 84 brat.
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now