Are the fiberglass fenders that are available from Pittsburg, Pennsylvania a poor fit? I tried to search the archives here and found a few mentions of them with conflicting reviews. 

You see the finish ? From what I recall you're going I need to improve the top coat.

 

I sincerely hope I'm wrong.

 

I am fortunate ? Enough to have gotten one glass fender about 12 years ago which has an excellent finish that will need minimal work. I'm not sure who made these as it was a random purchase from an unknowlegable source. At this point I might even sell mine this spring when I go through storage.

 

Hopefully one of the buyers of this mentioned lot in Pittsburg come thru.

I have a set.... The left side was fine, but the right side had to be "stretched". I got the fender on, then broke it with the door. The top of the fender where it bends down should be like 90 degrees. Instead it was 120 degrees and pulled the fender in towards the car. Probably from having things placed on top. Also the top coat has the quality of a pickle. Sure are cheap tho.