baltimore Posted February 16, 2016 Share Posted February 16, 2016 what year trannys will fit in a 90 legacy 90s hard to find with decent miles 4eat 2.2 awd thanks bill Quote Link to comment Share on other sites More sharing options...
wtdash Posted February 20, 2016 Share Posted February 20, 2016 Hi, Remember to Search as this is covered on here, and you'll find the info on other Subie sites too. 1990-91 are 4.11 FD Ratio, same as the '95-'98 EJ22-equipped Subaru Legacy and Impreza. It is plug-n-play w/the TCU (trans computer) so no need to change it. You could also use the '96-'98 EJ25-equipped Subarus, but you'll need the matching 4.44 FD ratio rear diff. GL, Td Quote Link to comment Share on other sites More sharing options...
idosubaru Posted February 20, 2016 Share Posted February 20, 2016 those 1990's had a clogging ATF line issue. Subaru provided a kit for remedying that situation. make sure you don't have that $20 fix on your hand first before looking into a transmission. www.car-part.com Quote Link to comment Share on other sites More sharing options...
baltimore Posted February 20, 2016 Author Share Posted February 20, 2016 thanks for the info guys Quote Link to comment Share on other sites More sharing options...
baltimore Posted February 20, 2016 Author Share Posted February 20, 2016 i did drain and change the fluid twice never pulled the pan wont shift out of 1st unless you feather the gas or push the manual button then shifts normally .I think reading man button locks out 1st an od once out of 1st man button off it shifts normally thru gears and into od but it doesn't engage i guess the right word does have 285k on it Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.