I found an 87 GL-10 in the local junkyard for the parts to do a rear disc conversion on my BRAT; I took the proportioning valve, rear hubs, backing plates, and hardware from it. I left the old rusty calipers and rotors with the plan to just buy good new stuff. I want to use the blank Brembo rotors but I can't find them for rears, only fronts. Where can you get the rear Brembo rotors?

Edited February 22, 201610 yr by musubk

I found my Brembo blanks on eBay, but that was a few years ago and they might not be in production anymore.  Also, the calipers for the rear disc brakes are very hard to come by, so you might want to circle back and grab those, in case you can't find any remanufactured calipers.

Calipers and rotors and still available a rockauto. Look up for a '90 as for some reason their system doesn't show all the parts if you look up for '88, '89 XT6. This is stock stuff not Brembo's.

Edited February 22, 201610 yr by silverhelme