Hi everybody,

 

I'm newbie, I'm looking for subaru carburetor adapter for hitachi dcz-328 as photo following (red mark).

 

 

(This will increase idle up when turn on A/C compressor)

 

I have searched in eBay & RockAuto but not found. if anybody know this part please help me.

 

Thanks,

Edited March 24, 201610 yr by ductran

If someone can help me, i'm really glad!!

Thanks,

I'm confused about what your asking especially since the picture doesn't work. The factory carb spacer?

I'm confused about what your asking especially since the picture doesn't work. The factory carb spacer?

 

Sorry, I borrow the photo of nick loyale 2.7 turbo so you confused.

Actually, I'm looking for hitachi dcz328 part which marked red circle. 

 

Thanks,

Edited March 29, 201610 yr by ductran

Having the correct name might help. That is part of the airconditioning system. Looks like what was on my 1986 ea82. If you look through a factory service manual, in the a/c section, it should help identify it. If you don't have a fsm, there are some online / on the forum.

Having the correct name might help. That is part of the airconditioning system. Looks like what was on my 1986 ea82. If you look through a factory service manual, in the a/c section, it should help identify it. If you don't have a fsm, there are some online / on the forum.

 

Thank for your help, As the my previous post, I have also noted "(This will increase idle up when turn on A/C compressor)"

If someone can help me, i'm really glad!!

Thanks,

If you need one (the part circled in red), I believe I have an extra I can part with. PM me.

I can't tell for sure, but it looks like a vacuum switch that Subaru uses for idle-up control.  Is there another vacuum nipple on the side not shown in the picture?.  If so, you probably just need another vacuum switch.  If it is a simple vacuum switch, there are many makes and models that you can swap in.

You need that part (idle up vacuum pod) and the vacuum solenoid to make it work.

If you need one (the part circled in red), I believe I have an extra I can part with. PM me.

Thank for your help, I sent PM to you.

You need that part (idle up vacuum pod) and the vacuum solenoid to make it work.

Yes, you are exactly.