Feedback on installing the motor/trans bolted together?

 

I have help but was thinking the car may need to be higher on the stands which could be an issue for the hoist that I have.

 

Thanks

 

I would install them separately.

I've pulled them together, its a pain.

Auto's are really bad.

If you drop the whole front subframe and suspension then yes

Yea, I figured to separate and install.  I received them trans/motor as one from a auto recycler.  I wasn't too happy to see a left strap on the intake.  I will check the intake bolts but why that when there are lift points on the motor?   I was reading some folks pull them that way?

There's a bracket on the passenger's side rear of the motor that has a large hole in it.  I've always used that and a one of the holes under the AC compressor.  If you're going with a leveler (highly recommended) then you'll have to find another point on each side to attach a chain.