February 9, 20179 yr So I installed an adf 2 inch lift last night and neither front block was marked l or r which way we're they supposed to go in, they're done now but I've got some nasty positive camber and I know it takes time to settle but I want to make sure they're in right does it slope in our outwards of the car towards motor from the strut or towards the wheel. I could find pictures.
February 9, 20179 yr The strut top and lift block needs to go inward towards the engine Scott with SJR lift
February 9, 20179 yr like he said - bring that strut top further in. current orientation is incorrect so mark them and you know there's only two more possibilities. Install both fronts in the other two orientations and one will be right - mark that and copy.
February 10, 20179 yr Author I had them swapped so I had to pull them back out and switch sides all fixed now, pain in the rump roast to do that lower balljoint though
February 10, 20179 yr Author The strut top and lift block needs to go inward towards the engine Scott with SJR lift Do you make just a subframe lowering kit for a 2inch kit but by itself? Say I wanted to add the drop down the road
February 11, 20179 yr Do you make just a subframe lowering kit for a 2inch kit but by itself? Say I wanted to add the drop down the roadyep see the 2 bars in lower part of picture, plus 4 long bolts shipped $110 http://www.sjrlift.com/images/stories/virtuemart/product/sjr ea82 2 alloy.jpg Edited February 11, 20179 yr by Scott in Bellingham
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now