I'm making a patch loom to install a Spider manifold XT engine into my turbo wagon.

I've traced all of the pins on the 2 loom plugs & there's only some minor changes.

 

Problem is that the spare engine loom I'm using as an extension is from an NA. It uses all 16 pins on the black plug like the turbo, but only 11 of 16 on the white instead of 12.

 

Therefore, I'm one pin short on the engine side of the loom.

 

Does anyone have a spare loom they'd pull a wire out of, or know where I could buy these pins?

 

Thanks in advance.

Try the local GM dealer.Pretty sure that is where I purchased some.

Failing that,take a sample to some of the other dealers.

 

Or,this website will have something for you.

https://www.bmotorsports.com/shop/index.php/cPath/109_181?osCsid=n7ii080oio1sdrqvnkg09ikj22

Edited October 2, 20178 yr by naru

Give us some measures, gender or photo of what you want. I have some odd stuff I bought for much same thing

Not Narva 56230 and 56231?

No, these are flat pins.

 

 

maybe 57539

G'day mate, How'd you get on?