December 22, 20178 yr Hello, I'm working on my 5 lug swap and my LCAs came without bolts. I know they're 12mm but do they need to be shouldered for the length of the bushing or does threaded work? Any idea where I can get ones that match?
December 22, 20178 yr I'd try the dealer. Post is a little vague. What control arms are you using? XT6?
December 23, 20178 yr Author I'd try the dealer. Post is a little vague. What control arms are you using? XT6? Xt6 front control arms. Need the bolt, but Subaru part number doesn't yield anything.
December 23, 20178 yr Author Just an M12 x 1.25 bolt. Higher grade the better. Not rocket science here. Ok, the engineer in me was likely over thinking it. I was concerned that if I didn't match the shoulder length properly id run the risk of binding the poly bushings.
December 24, 20178 yr Ok, the engineer in me was likely over thinking it. I was concerned that if I didn't match the shoulder length properly id run the risk of binding the poly bushings. there should be a steel sleeve insert inside the bushing to keep it from crushing down on the rubber or the LCA itself.
December 24, 20178 yr Author there should be a steel sleeve insert inside the bushing to keep it from crushing down on the rubber or the LCA itself. That is true, hopefully the poly bushings fit correctly.
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now