Skip to content
View in the app

A better way to browse. Learn more.

Ultimate Subaru Message Board

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Turn signal issue

Featured Replies

96 legacy. Both front and rear blinkers on the passenger side are extremely dim. Even the indicator on the dash is very dim. The drive side works just fine. If I turn on the hazards then both indicators in the dash get very dim and same dim blinkers on the passenger side. When the right side are operating it’s sounds normal not too fast, just extremely dim, but the temp gauge will bounce with the blinkers. Does this sound like a ground issue? Any ideas on where to look would be great

Yes, a ground-issue is definitely a possibility.

You could start by removing each bulb in turn, and seeing if the symptoms change.

one of those sockets has a ground short, probably through a lot of corrosion to provide just enough resistance to not blow the fuse, but enough to draw the volts down.

 

  • Author

Well I removed the rear bulb, and this didn’t change anything. Removed the headlight to get to the blinker on the front. I found the harness going to that bulb had become wrapped up and extremely stretched-Pinched on the hood prop rod. So I repaired that section of the harness and all is back to normal.

Thanks 

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.