I know this is gonna sound dumb, but here goes anyway....

 

when putting in new wheel bearings (front) do you pack the space between the spacer and the spindle with grease too??? or just leave it empty??

 

first time doing bearings and dont know...(i didnt take it apart either)

The more grease the better! It becomes a lot thinner when the bearings heat up, so you want as little air in there as possible.

 

GD

Thanks GD!! I kinda thought so, but never having done this before I wasnt sure and figured I would ask those that have done it.Now if my ball joint would get here, I can get the darn thing back together!!