cosmichooves Posted Tuesday at 05:21 PM Share Posted Tuesday at 05:21 PM I've recently replaced ball joints, inner and outer tie rods, cv boots, shocks, and a wheel bearing. Then I noticed dark grease under the power steering pump, and realized I was going to have to replace the rack and pinion bellows. Now I'm getting peculiar noises though, a higher pitched whining or whistling and a scraping sound. What am I likely hearing, it wasn't there before the bellow replacement. Link to comment Share on other sites More sharing options...
el_freddo Posted Wednesday at 08:30 AM Share Posted Wednesday at 08:30 AM Could be the dust plate under the bell housing. On manuals it’s a small rectangular plate, I’m unsure about the setup on autos. Maybe something levered this into the flywheel. Other than that I’m all out of ideas atm. Can you tell us under what conditions you hear the noise? Eg: at idle/under loads/at or above a certain speed. Is it rotational dependant? Rough location of the noise? Cheers Bennie Link to comment Share on other sites More sharing options...
lmdew Posted Wednesday at 01:53 PM Share Posted Wednesday at 01:53 PM What steps did you take to when replacing the bellows? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now