pm128 Posted October 18, 2004 Share Posted October 18, 2004 To make a long story short, I was pulling my engine on my gl-10 3at and managed to create an at fluid leak through the input shaft. A lot of at fluid leaked out behind the tc and down the case. So how screwed am I?. I'm hopeing that it is just the seal behind the tc on the tranny side. Anyone have any experiance with this? I really need to get this fixed so if anyone knows what seal I screwed up, and where to get it in the Seattle area help would be appreciated. Thanks Quote Link to comment Share on other sites More sharing options...
calebz Posted October 18, 2004 Share Posted October 18, 2004 Unless I just missed something, you are probably not screwed t all.. just slide the shat(s) back into place and make sure you get all 3 clicks from the TC when puttign it back on... Quote Link to comment Share on other sites More sharing options...
pm128 Posted October 18, 2004 Author Share Posted October 18, 2004 I'm worried about the AT fluid leaking out. Quote Link to comment Share on other sites More sharing options...
WJM Posted October 18, 2004 Share Posted October 18, 2004 you probably simply just pulled the TC off the shafts, that will create a leak. Put it back on the shafts and it will not leak. Quote Link to comment Share on other sites More sharing options...
pm128 Posted October 18, 2004 Author Share Posted October 18, 2004 you probably simply just pulled the TC off the shafts, that will create a leak. Put it back on the shafts and it will not leak. (I never worked on an auto before) :-) .. wow I'm in a much better mood now.. so what is the procedure for reinstalling the tc, I slide it on the shaft turn clockwise till I hear 3 clicks right? P Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.