Skip to content
View in the app

A better way to browse. Learn more.

Ultimate Subaru Message Board

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Interesting findings this morning...

Featured Replies

So...I finally got off my rump roast and put in the catless DP to complement the catless second cat on the Grassroots RX.

 

Here are the specs...ITS COMPLETELY STOCK! No MBC, no fancy intake as its all factory, the suspension is factory, and blah blah....the only mods are the DSM Gen1 BOV i have set up for recirc, a "cherry bomb" and the two gutted cats. The whol exhaust is 2 inches back to the cats, and it looks like 2 1/4 cat back...but the 'bomb' is more like a pea shooter...2 inches at most.

 

Road test...the turbo is at FULL BOOST at 2200!! Amazing...I wonder why...Before hand, with an open intake (cone on t3h MAF) it wouldnt get to full boost until 2500 or later. And for some reason...throttle response is the same if not better than other intake setups....me thinks SUBARU has the stock intake systems designed very well...as stock WRX/STi intakes are plenty good for power levels up to 400~450 hp...and there is not too much difference between the two designs...

 

I thought I'd share... :burnout:

bigger pipes more gets out of the motoor faster

faster exhaust travel means faster spool

  • Author
bigger pipes more gets out of the motoor faster

faster exhaust travel means faster spool

 

Its got stock sized piping.

And...DUH! :drunk:

well excuse me i can't be perfect all the time :)

i posted after work this morning and. well you know my other posting condition i think lol besides being tired hehe

 

i prolly miss read it

oh well

someone might find it useful

you still running the plastic peices in the air box?

  • Author
you still running the plastic peices in the air box?

 

Yes. The original as it comes factory setup.

are you goingto chop the airbox next?

 

orrrr..maybe get some 1/4mile or 0-60mph times WITH the airbox/snorkus intact, and then repeat with that sucker gone. we've never gotten some hard numbers on the effect of de-snorkus-izing the airbox, only seat of the pants estimates. granted, i've contributed some of those, and i stand by my estimates, but numbers would be nice...

yeah I'd like to know as well. I plan on moddin my RX but just want to know some figures of kinda a stock setup does:)

  • Author
are you goingto chop the airbox next?

 

orrrr..maybe get some 1/4mile or 0-60mph times WITH the airbox/snorkus intact, and then repeat with that sucker gone. we've never gotten some hard numbers on the effect of de-snorkus-izing the airbox, only seat of the pants estimates. granted, i've contributed some of those, and i stand by my estimates, but numbers would be nice...

 

I know that "to the bridge" (which is about a 0.2 mile run) there is NO difference in top speed between the stock stuff, cone filter, or chop box...only noise differences.

 

This RX is going to stay as stock as possible....maybe an oil cooler addition...and its got a recirc setup that stays.

 

The only mods that increase the "TTB" speed is...boost w/full intake, IC, full exhaust and so on...

 

Dyno results from the chop box, cherry bomb and 12 PSI only show 118 hp...thats THREE (3) HP increase over stock. :-\

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.