A DOG Posted December 16, 2004 Share Posted December 16, 2004 I know that their are a couple nuts on the 81 GL that control the hieght of the rear and front end, but where are they. I need to get the tallest I can out of the suspension. Link to comment Share on other sites More sharing options...
archemitis Posted December 16, 2004 Share Posted December 16, 2004 the front struts adjust with two nuts on the bottom of the lower spring collar. you could have them, but after many many years, most have been changed to non adjustable ones. the rear is a torsion bar and its got a nut you can turn to raise the rear. Link to comment Share on other sites More sharing options...
TheSubaruJunkie Posted December 17, 2004 Share Posted December 17, 2004 If you have a wagon, lift your rear seat up. Then you'll see a rubber cap that you remove. After you remove that cap, you'll find a 17mm nut that you can turn. This adjusts your rear torsion bar. For the front, there are 2 bolts on each Strut. Just under your spring. YOu can use a 19mm wrench to adjust them. Its a pain in the rump roast since those bolts probably see more dirt and road grime than anyother peice of your car. You wont get much more than 1.5" out of the adjustment. -Brian Link to comment Share on other sites More sharing options...
NorthWet Posted December 17, 2004 Share Posted December 17, 2004 If you have a wagon, lift your rear seat up. Then you'll see a rubber cap that you remove... Amplification: Rubber cap is near the centerline of the car. Link to comment Share on other sites More sharing options...
Qman Posted December 17, 2004 Share Posted December 17, 2004 If you have a wagon, lift your rear seat up. Then you'll see a rubber cap that you remove. After you remove that cap, you'll find a 17mm nut that you can turn. This adjusts your rear torsion bar. For the front, there are 2 bolts on each Strut. Just under your spring. YOu can use a 19mm wrench to adjust them. Its a pain in the rump roast since those bolts probably see more dirt and road grime than anyother peice of your car. You wont get much more than 1.5" out of the adjustment. -Brian Clarification, the strut nuts are 21mm and the rear torsion bar bolt is 19mm. Link to comment Share on other sites More sharing options...
archemitis Posted December 17, 2004 Share Posted December 17, 2004 i made a special tool for the front, its a giant 21mm wrench with the box end wrapped in duct tape. use antisieze, or penetrating lube, i broke one once, and had to weld it. Link to comment Share on other sites More sharing options...
TheSubaruJunkie Posted December 17, 2004 Share Posted December 17, 2004 I stand corrected. Guess its been a while since i had to worry about adjusting my suspension. -Brian Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now