Skip to content
View in the app

A better way to browse. Learn more.

Ultimate Subaru Message Board

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

#%$^@&*&* Digital Dash

Featured Replies

In case you didn't get it, I HATE DIGITAL DASHES!!!!! :temper: First it was the temperature guage, now it is the fuel guage. With a full tank of gas, sometimes it reads empty, somethings 2 bars, somethings 3 bars, something two bars from the top, and it changes every time that I turn the key on. :banghead: It is a good thing the odometer still works, I know about how far it goes on a tank of gas, so I re-fill when it gets close to that mileage. Has anyone else had this problem and found a fix???

Had a problem with my gauge but it turned out to be the sending unit was out of calibration.

 

Maybe the contacts on the sender are messed up? It is a lot easier to pull the sending unit than the digimondash.

 

Good luck!

my $350 86 that I had you swap the engine on... had the SAME problem... sometimes the gas light would come on AND the trip computer would read 0 miles after a fill up :cornfuzz:

 

Solution... I sold the car and told the guy to trust ONLY the odometer and the analog temp guage :clap:

Sounds like goofy contacts.

Try cleaning them up nice and shiny.

Humidity may be the culprit. Maybe some di-electric grease.

One of the digis I had in my '84 would act like that when it rained.

I assume this is on the '86 GL-10??

 

If so, it seems that the '85-'86 LCD digi-dashes had a problem with the solder joints for the fuel and temp gauges.

 

I fixed my temp gauge by pulling the cluster and holding a soldering iron on the temp sender pin on the back. I sold the car soon after, so I'm not sure how long the fix lasted.

 

Naturally, the correct solution would be to tear the cluster apart and properly solder the pins, but that would be quite a large job.

 

You might consider swapping an '87+ LED digi-dash in its place as they are much more reliable, but I don't know if the wiring would be the same or not.

  • Author

CIS, actually both of my Subarus have digital dashes, but you are right, it is the 86. I know about the solder trick, but never tried it. I've thought about that 87+ digi-dash, but there were quite a few changes to the interior between 86 and 87, so like you, I'm not sure it would work.

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.