Skip to content
View in the app

A better way to browse. Learn more.

Ultimate Subaru Message Board

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Why did my suby stall?

Featured Replies

okay so the other day i take my suby for a spin around my street court and as i was pulling into my driveway clunk clunk it went then the engine died on me right in front of my house. the engine cranked but it wouldn't start.to this day i'm not sure what happend. it started after i pumped the accelerator pedal while cranking it(its a carbed 85' GL wagon). i believe its the plugs or something. any way its probaly my my fault because i hadn't moved it for about a month or so before that happend. bad me bad bad bad me !

It could be a whole bunch of things. More info would help diagnose it better.

  • Author
It could be a whole bunch of things. More info would help diagnose it better.
well i'm not sure exactly what it was but i think it was faulty spark plugs or something in the ignition system what do you think it could be? nearest answer please.
  • Author
Check your timing belt.
the timing belt is fine to this point i'm not sure if i need a new belt soon because all i know is that you have to replace it every 100,000 miles ( my suby has 211,000 original miles on it) it could not have been the timing belt becouse the engine rotated so that can't be it.

The heads are non-interference, so engine rotation is not an indication of a good or bad T-belt.

 

Also the spec'd t-belt change interval is every 60k - so a snapped T-belt sounds likely - pull the disty cap off and crank - if the rotor rotates, then your t-belts are pro'lly good - usually the t-belt that goes on that side is the 1st to fail

 

the Hitachi - crappy carb could also be the problem - had a carb fail on me like that in 95-degree weather a mile and a half from home :mad: - sometime around then I decided to convert to SPFI at my next oppertunity

 

check for an ignition pulse with a timing light - that will give you a fairly definate yes/no on the ignition side of things - pull the plugs and check them too

 

try cranking it and holding the choke closed with something - if it starts it will buck a lot - but it will move

 

when was the last time the fuel pump/filter were replaced - failure of them would explain the bucking

  • Author
The heads are non-interference, so engine rotation is not an indication of a good or bad T-belt.

 

Also the spec'd t-belt change interval is every 60k - so a snapped T-belt sounds likely - pull the disty cap off and crank - if the rotor rotates, then your t-belts are pro'lly good - usually the t-belt that goes on that side is the 1st to fail

 

the Hitachi - crappy carb could also be the problem - had a carb fail on me like that in 95-degree weather a mile and a half from home :mad: - sometime around then I decided to convert to SPFI at my next oppertunity

 

check for an ignition pulse with a timing light - that will give you a fairly definate yes/no on the ignition side of things - pull the plugs and check them too

 

try cranking it and holding the choke closed with something - if it starts it will buck a lot - but it will move

 

when was the last time the fuel pump/filter were replaced - failure of them would explain the bucking

hey thanks man i'll check the fuel pump/filter. i'm converting to spfi in a year or two anyway. ( i'll just use your list you gave me on what to check).

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.