April 23, 200520 yr Author finally, here's some pics of my legacy LS with the outback struts you can compare it with the old struts in the "reader's rides" section
April 23, 200520 yr so what's the total ground clearance the struts give yah? an what size tires you running?
April 24, 200520 yr Author so what's the total ground clearance the struts give yah? an what size tires you running? well, i figure that the lowest point is the rear pumpkin, or possibly the pinch weld. i have yet to do an official measurment 205/65R15 Goodyear Regatta 2s. one size smaller than an actual outback, being 205/70R15. In a previous post, i said tat my co-workers are probably getting me 215/75R15 Kelly DT/Rs for my wedding present. 'scuse any mis-spellings....many glasses of wine.
April 24, 200520 yr Author needs 6" lift!!! lol. Very clean car, looks nice. Great ride mate. thanks, appriciate the compliments
April 25, 200520 yr Nice!! Is that struts only, did you do a lift as well or was that someone else? c'mon now, the green gods have to fess up to their Superu inspiration
April 25, 200520 yr Nice!! Is that struts only, did you do a lift as well or was that someone else? c'mon now, the green gods have to fess up to their Superu inspiration Sorry, I've been looking at this one with envy for years. . .
April 26, 200520 yr Author Nice!! Is that struts only, did you do a lift as well or was that someone else? c'mon now, the green gods have to fess up to their Superu inspiration Yesa', i must give credit where credit is due how much was that tube bumper, and from where did you get it, oh Muse
April 28, 200520 yr That's a mudrat specialty! http://www.oregonoffroadsubaruclub.org/ John ROCKS, his work is all over this board! Yesa', i must give credit where credit is due how much was that tube bumper, and from where did you get it, oh Muse
April 28, 200520 yr But yes yes, Thank you, thank you... Its really cool to see another new generation getting off the ground. i know there's some Candians thinking the same thing... Mudrat (aka John) has recently put a dual range 4x4 into a forester... Now we need to get some of that action going in these legacys!! Keep it up and let's see some pix when you get the new meats on it too!! That's a mudrat specialty!http://www.oregonoffroadsubaruclub.org/ John ROCKS, his work is all over this board!
April 28, 200520 yr Yes yes, thank you, thank you...:cool: No its really cool to see more legacys off the ground.. Its frustrating cuz when i began to look into it, BYB and these guys had lifts for old gen, and new gen, but not 95's (like mine)! But through some looking i found out about the strut swap, insta-lift option (especially good for a daily driver type) and was stoked! Cool to see more doing the same, and the OBSs too.. Keep us posted with pix of the new meats too, and call up john, look into a tube bumper and you'll be the envy of all your frineds, stranger will leave notes on your car in admiration, and you will walk taller John's in Oregon... -mw- (sorry for the duplicate message..)
April 29, 200520 yr Author -mw- (sorry for the duplicate message..) i can't imagine how much it would cost to ship that thing from oregon to pittsburgh. did it bolt right on, or was there some fabrication needed?
April 29, 200520 yr John's actually got a jig made for this bumper. Its essentially the same bumper on an '04 baja, an '03 outback wagon and now my 95 sedan... Yeah it really just bolts on! get in touch with John he'll help you out and probly work with you for sure... Tell him I sent you i can't imagine how much it would cost to ship that thing from oregon to pittsburgh. did it bolt right on, or was there some fabrication needed?
April 29, 200520 yr Deffintely need more of these in the world!! C'mon you know you want too! And I'm not even getting a commission on this John's actually got a jig made for this bumper.Its essentially the same bumper on an '04 baja, an '03 outback wagon and now my 95 sedan... Yeah it really just bolts on! get in touch with John he'll help you out and probly work with you for sure... Tell him I sent you
April 29, 200520 yr Sorry man, I'm not trying to hijack your thread, just fired up for more tricked out ne generation stuff... I'm stoked to see your new meats, when're they getting bought and installed? -mw- Deffintely need more of these in the world!! C'mon you know you want too! And I'm not even getting a commission on this
April 29, 200520 yr Author Sorry man, I'm not trying to hijack your thread, just fired up for more tricked out ne generation stuff... I'm stoked to see your new meats, when're they getting bought and installed? -mw- hey, it's as much your thread as it is mine. if it weren't for you i wouldn't have even made this thread and by the way.....there's nothing better than quoting yourself in a reply.. i love it.
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now