eddygordouk Posted June 19, 2005 Share Posted June 19, 2005 Hi, i was wondering if anyone could provide pictures of the clutch line where it connects on to the engine part. i cant really explain this well but i guess theres a brake line thing that also connects so when ur on a uphill and hold down the clutch it holds the bake down also so u dont roll back?? thats what it says in the owner's manual. plus it seems mine might be loose so i wanted to see a few reference pics. thanks alot. Link to comment Share on other sites More sharing options...
erik litchy Posted June 19, 2005 Share Posted June 19, 2005 not going to take pics but its very simple. its a cable that runs from the clutch fork over the engine to near where the master cyl is. you should see where it connects theres a spring and its pretty obvious. Link to comment Share on other sites More sharing options...
NorthWet Posted June 19, 2005 Share Posted June 19, 2005 It's referred to as the "hillholder". As EriK says, there is a cable that runs from the clutch fork (attaches to the opposite side of the fork from the clutch actuator cable), and then attaches to the hillholder valve. The adjustment is made at the clutch fork, and is done so on a mild upslope so that you can test the results. If you still need pictures, let me know exactly what you want and from what angle (from side or front of car, etc). Link to comment Share on other sites More sharing options...
eddygordouk Posted June 19, 2005 Author Share Posted June 19, 2005 It's referred to as the "hillholder". As EriK says, there is a cable that runs from the clutch fork (attaches to the opposite side of the fork from the clutch actuator cable), and then attaches to the hillholder valve. The adjustment is made at the clutch fork, and is done so on a mild upslope so that you can test the results. If you still need pictures, let me know exactly what you want and from what angle (from side or front of car, etc). yeah i still need pics because i think mine was undone or i need something to connect it again. i just need pictures of it held togethere and all, jus a few from different angles would be great. thanks. Link to comment Share on other sites More sharing options...
NorthWet Posted June 19, 2005 Share Posted June 19, 2005 I am in the middle of changing fluids, so it will be aawhile before I can get pics. I noticed that you tried to PM me, so I did clean out my PM inbox. Link to comment Share on other sites More sharing options...
NorthWet Posted June 19, 2005 Share Posted June 19, 2005 I uploaded 2 photos into the Photo gallery. First one is of the clutch fork end of the cable http://www.ultimatesubaru.org/photos/showphoto.php?photo=6355 and the second is of the valve end. http://www.ultimatesubaru.org/photos/showphoto.php?photo=6356 I hope that these help. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now