October 12, 200520 yr I want to replace my 4EAT with a 5MT. Will the diffs that I used with the auto fit the manual? Thanks, gang. Brian G
October 12, 200520 yr Maybe... Your differential most likely has a 3.7:1 ratio, and the 5MT has a 3.9:1 ratio if it's from an n/a. If it's from a turbo car, the transmission most likely has a 3.7:1 ratio, so you can use your differential.
October 12, 200520 yr Author My diff's ratio is 4.44. I was wondering if I can remove the diff from the transmission and use my 4.44 instead. Brian G Maybe... Your differential most likely has a 3.7:1 ratio, and the 5MT has a 3.9:1 ratio if it's from an n/a. If it's from a turbo car, the transmission most likely has a 3.7:1 ratio, so you can use your differential.
October 12, 200520 yr Author The transmission and rear end that I have are from a '97 Outback Limited. The car they're going into is an '88 XT6 . I want to keep the 4.44 ratio but switch to a manual transmission, but I don't know if I can mate the front diff to a 5MT. Brian G
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now