dentedfender Posted December 10, 2005 Share Posted December 10, 2005 im replacing the clutch on my 84 gl and cant get the pilot bearing out and was wondering how you guys did it. or if it is really that important to replace. thanks jacob Link to comment Share on other sites More sharing options...
idosubaru Posted December 10, 2005 Share Posted December 10, 2005 definitely replace it. that's alot of work to install an old bearing. i recall someone on hear not replacing something and it failing within a year...i think it was a throwout bearing but i can't remember exactly. Link to comment Share on other sites More sharing options...
GLCraig Posted December 10, 2005 Share Posted December 10, 2005 Take off the flywheel and tap it out with a hammer and socket. Link to comment Share on other sites More sharing options...
Subarian Posted December 10, 2005 Share Posted December 10, 2005 Here's a really easy way. Fill the hole with grease, and use a drift or a dowel that fits tight. Hammer the drift, and the grease will force the pilot bearing out. Link to comment Share on other sites More sharing options...
dentedfender Posted December 10, 2005 Author Share Posted December 10, 2005 thanksfor your help guys i got it out using the grease way that i tried before but i didnt have a tight enough fit. Some good old duct tape helped me out there. hanks again jacob Link to comment Share on other sites More sharing options...
scrap487 Posted December 10, 2005 Share Posted December 10, 2005 wow thats a neat trick.. thanks I'm gonna remember that next time I replace my clutch.. :-) Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now