January 24, 200620 yr So has anyone hooked up a DR tranny into a push button car and hooked up the 4wd light? Call me picky, but I would like the dash lights to work and just wondered if it's been done.
January 24, 200620 yr The car's a 94 Loyale, so info on disabling the clutch switch would be good too.
January 24, 200620 yr The 4wd light should be easy, but you won't have the "LO" light unless you swap dashes, and then that becomes rather trying if you want to get all things working again.
January 24, 200620 yr i say just look down at the lever and you will know if its in 4 or low or not -=Suberdave=-
January 24, 200620 yr It's really easy to swap half the wiring on the tranny over. The pushbutton wireing should plug into the switches on the dual range tranny, except for the neutral switch if the d/r came out of a carb car. Only the 4wd will light up, the switch for the lo range is right at the 4wd lever and there is no hookups.
January 24, 200620 yr Almost Hijacking post.... So can one swap dashes out between a DL and GL? Is all the wiring behind the dash standard and there are unused connectors waiting to be used? thanks, r/ PK
January 24, 200620 yr Almost Hijacking post.... So can one swap dashes out between a DL and GL? Is all the wiring behind the dash standard and there are unused connectors waiting to be used? thanks, r/ PK I was able to do it, the only real issues that i've had were the oil pressure gauge, and i believe another gauge, but i can't remember. its pretty straight forward, but make sure to hook the vacuume line back up, as right now i only have foot warmer, which is no good when we get a frost, which luckily i wake up after it goes away.
January 24, 200620 yr Hmm, personally I found it an nightmare. I have put in a Tacho dash with oil pressure and volts into my DL. It took quite a while - the plugs were different.. the wire colours were different. Mine is an Australian car- maybe there is a difference with US models. There are 4 connectors on mine - all wired up differently to the DL. Almost Hijacking post.... So can one swap dashes out between a DL and GL? Is all the wiring behind the dash standard and there are unused connectors waiting to be used? thanks, r/ PK
January 24, 200620 yr Let me be more accurate, i swapped the entire dash, not just the insturment cluster.
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now