eventoday Posted March 13, 2006 Share Posted March 13, 2006 ok yeah another question from me. i think my car possesed. ok 97 outback 182000 miles. 2.5l just redid cylinder heads and other parts. i was putting a little bit of oil in my car today. the car was on and idling fine. as i was adding oil i noticed a pretty loud gurgling/spitting coming from the filler tube. i have never heard such a thing before. i just did an oil change 500 miles ago too and it was very low on oil today. it never burned oil before that as far as i know. i also heard the gurgling in the dipstick HELP! HELP! HELP! jake Link to comment Share on other sites More sharing options...
eventoday Posted March 14, 2006 Author Share Posted March 14, 2006 man usually i get a repsonse right away. is it that bad no ones wnats to tell me Link to comment Share on other sites More sharing options...
Subarian Posted March 14, 2006 Share Posted March 14, 2006 I would take a look at your PCV valve. Just my guess. Link to comment Share on other sites More sharing options...
cookie Posted March 14, 2006 Share Posted March 14, 2006 Don't add oil with the engine running. You are shutting it off to check aren't you? It sounds like it is burning oil which is about right with the blowby. Link to comment Share on other sites More sharing options...
nipper Posted March 15, 2006 Share Posted March 15, 2006 i agree. Also you can get a face full of oil from some cars due to crankase pressures, air movement etc. ALso its impossible to tell when the crankase is full with the engine running nipper Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now