86subaru Posted October 27, 2003 Share Posted October 27, 2003 went to napa to order a clutch kit, there are 2 possible, 8in with 7/8 shaft or 8in with 1in shaft , which one would i need, or how do i tell ? thanks :wave: Link to comment Share on other sites More sharing options...
ShawnW Posted October 27, 2003 Share Posted October 27, 2003 EA82 Trannys use the 1" clutch in my experience. Link to comment Share on other sites More sharing options...
MaroonDuneDoom Posted October 27, 2003 Share Posted October 27, 2003 ShawnW, how sure are you of this? i am in need of clutch work too and also have an 88 gl wagon. i am just wondering because i don't need to install it twice.:-\ will both of them fit. thanks Link to comment Share on other sites More sharing options...
WAWalker Posted October 27, 2003 Share Posted October 27, 2003 '85-'91 1.8L 4WD, including turbo, take 8 7/8" disc with 1" Shaft. '80-'824WD & "80-"91 4WD, take 7 7/8" disc with 7/8" shaft. '83-'84 4WD take 8 7/8" with 7/8" shaft. Link to comment Share on other sites More sharing options...
EmmCeeBee Posted October 27, 2003 Share Posted October 27, 2003 I haven't replaced my clutch, but at 126k miles I'm getting prepared to... So this isn't from experience, just from reading up on it. From what I understand, the 4WD clutch is a 24-tooth spline, 225mm. The 2WD is 21 spline, 200mm. But this is for 1988. Just pulled up my reference for this. See: http://www.clutchman.com/HTML/Catalog/Subaru.htm (I got that link from someone on this board earlier!) -- Mark Link to comment Share on other sites More sharing options...
86subaru Posted October 27, 2003 Author Share Posted October 27, 2003 ok i am going to put a turbo a/t motor from a xt into a gl 4wd manual wagon ,both are 88 , so which one would i need 1in or 7/8 ??? :wave: Link to comment Share on other sites More sharing options...
WAWalker Posted October 28, 2003 Share Posted October 28, 2003 The 1" Link to comment Share on other sites More sharing options...
86subaru Posted October 28, 2003 Author Share Posted October 28, 2003 thanks , :wave: Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now