SOOBOUTLAW Posted July 4, 2006 Share Posted July 4, 2006 EA81 torsion bar. Wondering how common it is. I replace my driver's side cuz it was tucked in a bit too much (must have been that pothole I hit when I was tearing up a dirt lot in RWD) new one straightened it out. Also replaced the passenger side, was fine but had a bad bearing and for 20 bux I swapped the whole thing(control arm). But, now the passenger side has the tucked in look(toe in). I have my torsion bars clocked down a notch. Been that way for years now, never had a problem. Just wondering if it's common to bend em outta whack(besides for me). Yes, I take 'er offroad. But, I didn't bend the fresh passenger side control arm, got it that way at PAP. Didn't notice until it was installed and driving. Link to comment Share on other sites More sharing options...
GeneralDisorder Posted July 4, 2006 Share Posted July 4, 2006 Yeah - people slide into curbs and such - it can be the torsion bar plate or the actual control arm. Check the mounting tabs on the torsion bar tube. GD Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now