I just picked up a motor from superbrat.the motor is missing a carb but thats not a problem...Now I just need to wait untill monday so I have time to install it..

 

BTW SuperBrat,empty your PM box...

 

do I just bolt flywheel on then attach clutch to tranny or...

it is really straight forward.just pay attention when you pull the motor,and you shouldn't have any probs .it does help if you have a clutch tool(just a little splined thingy to center the clutch before you tighten down the pressure plate,to the flywheel,which is attached to the back of the motor).:grin:cheers,brian

do I need the tool?

Yes, the tool helps alot! I'd suggest finding someone local to borrow one from, or maybe see if autozone has one you can rent.

 

If the new engine doesnt have a flywheel, then your old flywheel should bolt right up.

 

-Brian