jk4138 Posted November 14, 2006 Share Posted November 14, 2006 I was wondering if there are torque specs for the carburetor base bolts? Link to comment Share on other sites More sharing options...
GeneralDisorder Posted November 14, 2006 Share Posted November 14, 2006 Not per-se. Go with 12 ft/lbs if you really must havea figure. Just tight is fine. GD Link to comment Share on other sites More sharing options...
jk4138 Posted November 14, 2006 Author Share Posted November 14, 2006 That is kinda what I was figuring. Also what is the easiest way to get the passenger side front nut tight being that the power steering reservoir and pump are in the way. I got in there with a mini wrench but don't think I got it tight enough. Link to comment Share on other sites More sharing options...
GeneralDisorder Posted November 14, 2006 Share Posted November 14, 2006 That is kinda what I was figuring. Also what is the easiest way to get the passenger side front nut tight being that the power steering reservoir and pump are in the way. I got in there with a mini wrench but don't think I got it tight enough. Heh. Need a shop midget for that one. Grind a small groove on the top edge of each flat side of the nut, and use a screwdriver and a hammer on it. GD Link to comment Share on other sites More sharing options...
daeron Posted November 15, 2006 Share Posted November 15, 2006 Heh. Need a shop midget for that one. Grind a small groove on the top edge of each flat side of the nut, and use a screwdriver and a hammer on it. GD I read a science fiction novel once where there was a race of beings who solved their "work" probelsm biologically, through genetic engineering, where we attack things technologically, through machines.. they has different "breeds" of their own species (literally, shop midgets!) for tasks such as this. off topic? yes, but it was also pointless Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now